On This Page
Configuring SNMPv2
To work with SNMPv2 in TOS Aurora:
-
Set the
community
field to the value configured in TOS Aurora. The default ispublic
. -
Enable port listening.
SNMP get/walk requests must be sent to the Primary VIP via port 161. If you use an external IP/host, configure the SNMP to that IP/host. For security purposes, listening at port 161 is disabled by default.
-
Add the TOS Aurora MIB file to your SNMP server.
Change the community field
-
In your browser, go to: https://
<TOS URL>
/v2/monitor-tower/graphiqlExample
-
Run the mutation
editNotificationProtocolConfiguration
and specify a new value.Example
Enable port listening
-
Run the following command: