Adding a Node on GCP

For additional help, refer to the official documentation Create and start a VM instance.

1. In the Google Cloud console, navigate to Compute Engine > VM instances

2. Click CREATE INSTANCE.

3. Configure:

   • Name:

   • Region/Zone: As appropriate

   • Machine family: GENERAL-PURPOSE

   • Series: E2

   • Machine type: Custom

   • Cores / Memory: According to the load-model parameter value received from your account team.

4. Under Boot Disk, click CHANGE.

5. Configure the boot disk.

   • Make sure tab Public Images is selected.

   • Operating system: Red Hat Enterprise Linux or Rocky Linux

   • Version:

     • Red Hat Enterprise Linux 8.6, 8.8, or 8.9

     • Rocky Linux 8.6, 8.8, or 8.9

   • Boot disk type, SSD persistent disk

   • Size, The value received from your account team.

6. Click Select. The boot disk settings will be saved.

7. Select Advanced options.

8. Select Networking.

9. Configure Networking:

   • Network tags: default-allow-ssh allow-nginx-ingress

   • Hostname: Optional

10. (Optional) Host name: Type a host name or use the default device value.

11. Click CREATE.

Add the VM to the Instance Group

For more information about managing instance groups, see the vendor documentation Group unmanaged VMs together.

Leave default values for all parameters not mentioned.

1. Navigate to Instance groups.

2. Select the instance group that contains the existing VMs in the cluster.

3. Configure:

   • VM Instances: Add the new VM created previously

4. Click SAVE.

For more information, see the vendor documentation Set up the load balancer.

Leave default values for all parameters not mentioned.

1. Navigate to Load balancing - Network services.

2. Select the load balancer created previously for the primary data node

3. Click Backend configuration:

4. Enter values:

   • Backends: SELECT EXISTING INSTANCES

   • VM instances: Add the new VM created previously

5. Click DONE.

To connect via ssh you can add an existing ssh key to GCP via UI or use the gcloud utilily to generate key and add it.

To generate a key using gcloud:

1. Download gcloud to your workstation.

2. Run gcloud auth login command to login to your account. Variable <PROJECT_ID> can be set once globally to avoid entering it each time.

   gcloud config set project "<PROJECT_ID>"

   gcloud config set project "<PROJECT_ID>"

   gcloud compute ssh --zone "<ZONE>" "<VM_INSTANCE_NAME>" 

   gcloud compute ssh --zone "<ZONE>" "<VM_INSTANCE_NAME>"

If not done already, set up partitions according to the Prerequisites.

1. If you are not currently logged in as user root, do so now.

   [<ADMIN> ~]$ su -

   su -

2. If you want to change the host name or IP of the machine, do so now. Once TOS Aurora has been installed, changing the host name or IP address will require reinstalling - see Changing IP Address/Host Names. To change the host name, use the command below, replacing <mynode> with your preferred name.

   [<ADMIN> ~]# hostnamectl set-hostname <mynode>

   hostnamectl set-hostname <mynode>

3. Modify the environment path to run TOS CLI commands without specifying the full path (/usr/local/bin/tos).

   [<ADMIN> ~]# echo 'export PATH="${PATH}:/usr/local/bin"' | sudo tee -a /root/.bashrc > /dev/null

   echo 'export PATH="${PATH}:/usr/local/bin"' | sudo tee -a /root/.bashrc > /dev/null

4. Synchronize your machine time with a trusted NTP server. Follow the steps in Configuring NTP Using Chrony.

5. Configure the server timezone.

   [<ADMIN> ~]# timedatectl set-timezone <timezone>

   timedatectl set-timezone <timezone>

   where <timezone> is in the format Area/Location. Examples: America/Jamaica, Hongkong, GMT, Europe/Prague. List the time-zone formats that can be used in the command.

   [<ADMIN> ~]# timedatectl list-timezones

   timedatectl list-timezones

6. Upgrade the kernel:

   [<ADMIN> ~]# dnf upgrade

   dnf upgrade

7. Disable SELinux:

   • If file /etc/selinux/config exists, edit and change the value of SELINUX to disabled:

     SELINUX=disabled

   • If the file doesn't exist or SELINUX is already set to disabled, do nothing.
8. Reboot the machine and log in.
9. Install Wireguard. This is needed to encrypt communication between nodes (machines) within the cluster. See Install Wireguard and follow the steps for your Linux distribution.
10. Reboot the machine and log in.

11. Install tmux and rsync:

    [<ADMIN> ~]# dnf install -y rsync tmux

    dnf install -y rsync tmux

12. Disable the firewall:

    [<ADMIN> ~]# systemctl stop firewalld

    systemctl stop firewalld

    [<ADMIN> ~]# systemctl disable firewalld

    systemctl disable firewalld

13. Create the TOS Aurora load module configuration file /etc/modules-load.d/tufin.conf. Example using vi:

    [<ADMIN> ~]# vi /etc/modules-load.d/tufin.conf

    vi /etc/modules-load.d/tufin.conf

14. Specify the modules to be loaded by adding the following lines to the configuration file created in the previous step. The modules will then be loaded automatically on boot.

    br_netfilter
    wireguard
    overlay
    ebtables
    ebtable_filter

    br_netfilter wireguard overlay ebtables ebtable_filter

15. Load the above modules now:

    [<ADMIN> ~]# cat /etc/modules-load.d/tufin.conf |xargs modprobe -a 

    cat /etc/modules-load.d/tufin.conf |xargs modprobe -a

    Look carefully at the output to confirm all modules loaded correctly; an error message will be issued for any modules that failed to load.

16. Check that Wireguard has loaded correctly.

    [<ADMIN> ~]# lsmod |grep wireguard

    lsmod |grep wireguard

    The output will appear something like this:

    wireguard              201106  0
    ip6_udp_tunnel         12755  1 wireguard
    udp_tunnel             14423  1 wireguard
    

    If Wireguard is not listed in the output, contact support.

17. Create the TOS Aurora kernel configuration file /etc/sysctl.d/tufin.conf. Example using vi:

    [<ADMIN> ~]# vi /etc/sysctl.d/tufin.conf

    vi /etc/sysctl.d/tufin.conf

18. Specify the kernel settings to be made by adding the following lines to the configuration file created in the previous step. The settings will then be applied on boot.

    net.bridge.bridge-nf-call-iptables = 1
    fs.inotify.max_user_watches = 1048576
    fs.inotify.max_user_instances = 10000
    net.ipv4.ip_forward = 1

    net.bridge.bridge-nf-call-iptables = 1 fs.inotify.max_user_watches = 1048576 fs.inotify.max_user_instances = 10000 net.ipv4.ip_forward = 1

19. Apply the above kernel settings now:

    [<ADMIN> ~]# sysctl --system

    sysctl --system

1. Log in to the primary data node.

2. On the primary data node:

   [<ADMIN> ~]$ sudo tos cluster node add --role=worker

   sudo tos cluster node add --role=worker

   On completion, a new command string is displayed, which you will need to run on the new node within 30 minutes. If the allocated time expires, you will need to repeat the current step.

3. Copy the command string to the clipboard.

4. Log in to the new node.

5. On the new node, paste the command string copied previously and run it. If the allocated time has expired, you will need to start from the beginning.
6. Verify that the node was added by running sudo tos cluster node list on the primary data node.