Previous topic

Next topic

Parent topic

Locate in Contents

Adding Check Point R80.x MDS Devices

You must configure the Check Point servers in the following order: Provider-1 MDS, Provider-1 CMAs, SmartCenter servers (SMCs), and Log Servers (CLMs).

After you upgrade a monitored Check Point MDS device to R80, you must upgrade the device in SecureTrack to use Check Point R80 support.


You will need to complete the following prerequisite steps to add Check Point Multi-Domain Security (MDS) devices to SecureTrack:

  1. Configure the Check Point server for OPSEC communication with SecureTrack.
  2. Configure the Check Point device to use your SecureTrack server as a GUI client.

    The SecureTrack server is displayed in a revision in the GUI client column.

  3. Enable the API software blade.
  4. For a Provider-1 MDS server:
    1. From the File menu, select Save.
    2. Right-click the Global Policy and select Assign/Install Global Policy.
  5. Wait for confirmation that the database was saved.
  6. Create a Check Point user with Rest API Access to retrieve revisions:
    1. SecureTrack uses Check Point APIs to connect to (and monitor) Check Point R80.x devices. A user with the Domain Manager profile who has the Read Only All Permission Profile configured for All Global Domains with the required collection access via the Check Point APIs can retrieve revisions for the device. On an MDS:

    2. To maintain the password you defined for the Check Point user with REST API access, in Set Password, uncheck User must change password on next login.

Monitor a Check Point Device

To configure SecureTrack to monitor the policy revisions of a Check Point device:

  1. In Settings > Monitoring, select Manage Devices:

    Add Devices

  2. In Start monitoring a new device, select the appropriate device type:

    Add SmartCenter

  3. Configure the device settings:

    Depending on the Check Point server type, some or all of the following options will appear:

  4. Click Next.
  5. Configure OPSEC Secure Internal Communication (SIC):

    New CP CMA stage 2

  6. Click Next.
  7. In the OPSEC Settings:

    1. Select Custom.
    2. Configure the LEA Authentication fields:
      • Authentication Mode - Some options require you to enter an SL or FWN1 Secret Key in theAuthentication Keys section and Establish Authentication Key.
      • Port
    3. Configure the CPMI Authentication fields:
      • Authentication Mode - asym sslca (filled automatically)
      • Port
    4. To include monitoring of the Global Database for a Provider-1 MDS, select Provider-1 Administrator and configure the Provider-1 Superuser credentials.

      For Global Database monitoring, SecureTrack must also be set as a valid GUI client for the MDS.

  8. Click Next.
  9. For a Check Point MDS R80 device, configure the Management API.
  10. In the monitoring settings, do one of the following:

  11. Click Next.
  12. You can test the communication with the Check Point server by clicking Test Connectivity:

    New CP CMA stage 5

  13. Click Save.

    The Check Point device is shown in the Device Configuration list.

    If you use non-standard LEA authentication, see this technical note.

  14. If you have a secondary Check Point management server, configure SecureTrack to communicate with the secondary server in the event of a failover.

Define an Internet Object

To customize the device object that represents the Internet, see Define Internet Object.

In This Section

Enabling the API Software Blade

CP Management API